Tempered glass HOFI Uv Glass Galaxy S20 Ultra Clear
- Tempered glass HOFI Uv Glass Galaxy S20 Ultra Clear ✅ 100% original
Hofi Tempered glass protects a significant part of the rounded screen, has a surface hardness of 9H, which is why it is extremely scratch-resistant even when in contact with sharp objects, and additionally, it is covered with an oleophobic coating that reduces the number of fingerprints.
The UV model is glued with a liquid substance on the entire surface of the screen, and then the substance is cured with a UV lamp.
Thanks to this combination, we obtain the perfect effect of smoothness, clarity and responsiveness.
Installation is easy and user-friendly
Check how to install: https://www.youtube.com/watch?v=W7uxROE7ywk&feature=youtu.be
* We do not recommend the use of 3D glass without any housing.
** We do not recommend the use of glass if the housing overlaps the edges of the screen too much, there is a risk of leverage.
*** The functionality of the fingerprint reader in the screen may be slightly disturbed with the installed coating in the form of foil or glass. The fingerprint reader is not fully developed in terms of additional coatings.
1) Begin installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and it will not disturb your installation.
2) Clean and degrease the screen surface thoroughly, then use a dry cloth to polish it to a shine.
3) Use the tape from the kit to cover the speaker.
4) Connect the UV lamp with the Type-C cable to the power source.
5) Pour the liquid into the very center of the device.
6) Install the glass as evenly as possible, this stage can also be corrected before the surface hardens when the liquid is on the screen along with the glass.
7) If there is an air bubble, use an ATM card and gently push it outside the glass, this is done before curing.
8) Use a UV lamp to harden the glass along the center in five places for 15 seconds and then around the edge for 10 seconds.
9) Clean the Mobile phone from remnants of hardened glue.
10) If your device has a fingerprint reader in the screen, remember to remove and re-add the fingerprints after installing the glass on the screen.
11) Enjoy a job well done!
- 100% Original
- Packed in the original packaging
- Tempered glass with a thickness of 0.3 mm
- 9H scratch resistance
- Equipped with an oleophobic coating
- Leaves no trace after disassembly
- Dimensions: 161x73mm
1 x Hofi Glass
1 x UV Lamp (without Type-C cable)
1 x tube with glue
1 x Installation Kit